Voor dit artikel is een nieuwere versie beschikbaar. Details vindt u hier
This article number 00%number% is only available for a limited time.
Defined wearing parts kits might still be available.
Please contact us regarding a successor product.
Magneetventiel voor hoge drukken
Type 2400 / Artikelnr. 283
Productbeschrijving
Het voorgestuurde ventiel type 2400 bezit een servozuiger met 2-weg-voorsturing. Het is ontwikkeld voor hoge drukken. De bijzonderheid van dit ventielontwerp zit 'm in de vormgeving van zitting en afdichtelement. Een extra radiale afdichting maakt een zeer goede dichtheid mogelijk. Het kegelvormige afdichtelement van de voorsturing maakt schakelen van hoge drukken mogelijk bij een relatief gering vermogen van de spoel.
- Goederencode
- 84818079
- Land
- DE
Technische omschrijving
Naam |
Waarde |
Eenheid |
---|---|---|
Type | 2400 | |
Operation | servo-controlled | |
Actuator type | Plunger valve | |
Main valve operating principle | Globe valve | |
Switch function | on/off | |
Media separation | No | |
Valve function | A - normally closed - inlet port 1 (P/NC) | |
Fluidic port connection number | 2 | |
Valve function number of switching positions | 2 | |
Valve function manual actuation | No | |
Flow | Above seat | |
Nominal pressure min | 1 | bar |
Nominal pressure max (gas) | 160 | bar |
Nominal pressure max (liquid) | 160 | bar |
Main valve orifice 1 (P) (mm) | 12 | mm |
Main valve orifice 1 (inch) | 7/16 inch | |
Kv value (water) | 2.6 | m3/h |
QNn value (gas) | 2800 | l/min |
Main valve wetted material | Brass | |
Port connection 1 type | Inner thread | |
Port connection 1 thread type | G | |
Port connection 1 thread marking | 1/2 | |
Port connection 2 type | Inner thread | |
Port connection 2 thread type | G | |
Port connection 2 thread marking | 1/2 | |
Valve seat material | Stainless steel | |
Medium-contacting part core material | Stainless steel | |
Medium-contacting part stopper material | Stainless steel | |
Seat seal material category | Plastics | |
Seat seal material | PTFE (Polytetrafluorethylene) | |
Sealing toward outside material | NBR (Nitrile rubber) | |
Temperature environment max | 55 | °C |
Temperature medium min | -10 | °C |
Temperature medium max | 80 | °C |
Voltage / rated voltage | 230 | V |
Voltage / rated voltage | 230 | V |
Voltage tolerance negative | 10 | % |
Voltage tolerance positive | 10 | % |
Voltage frequency | 50 | Hz |
AC voltage | Yes | |
DC voltage | No | |
Battery voltage | No | |
Rated power consumption | 20 | W |
inrush power consumption AC | 85 | V·A |
Rated power AC | 48 | V·A |
Electrical connection sort | Plug pattern form A according to DIN EN 175301-803 | |
Electrical connection number of contacts | 2 + Grounding conductor | |
Electrical connection position | in direction of flow left | |
Protection type (IP max. with suitable connector) | 65 | |
Coil type | placed on top | |
Coil insulation material category (encasement) | Plastics | |
Coil insulation material (encasement) | Epoxy | |
Coil wiring overvoltage protection | without | |
Coil wiring rectifier | No | |
Coil wiring polarity recovery diode | No | |
Thermal insulation class of the actuator | H | |
Nominal operation/Duty cycle | 100 | % |
Switch time open min | 100 | ms |
Switch time open max. | 200 | ms |
Switch time close min | 300 | ms |
Switch time close max. | 500 | ms |
Valve setting opening time | No | |
Valve setting closing time | No | |
Back-pressure-resistant version | No | |
Vacuum version | No | |
Analysis version | No | |
Oxygen version | No | |
Oil burner valve | No | |
Steam version | No | |
Pilot control orifice (mm) | 1.2 | mm |
Pilot control seal material | PCTFE (Polychlortrifluorethylene) | |
Low-noise version | No | |
Main valve with integrated screen | No | |
Installation length | 75 | mm |
Without mounting | No | |
Valve construction | Valve complete | |
Gewicht | 2,020000 | kg |