Servo-assisted 2-way high-flow solenoid control valve

Type 6223 / Article No. 314593

The depiction of the products may differ from the actual specific design.

Please consider the technical attributes.

€302,00 per pieces

Check availability and price

List price exclusive of VAT

Unit: pieces

2/2-way-solenoid control valve pilot op.

Control valve for continuous control of liquids
Low hysteresis and high repeatability
Control with PWM signal
Servo-assisted, tight closing valve

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Product description

The valve Type 6223 can be used for the control of larger flow quantities. Low hysteresis, high reproducibility and good response sensitivity guarantee good positioning behaviour. The valve closes tight. The push-over coil is easy to replace.

Commodity Codes: 84818079
Country: DE

Technical attributes

Name	Value	Unit
Type	6223
Valve function	A - normally closed - inlet port 1 (P/NC)
Fluidic port connection number	2
Valve function number of switching positions	2
Actuator type	Plunger valve
Operation	servo-controlled
Main valve operating principle	Piston
Switch function	constant
Main valve orifice 1 (P) (mm)	13	mm
Main valve orifice 1 (inch)	1/2 inch
Sealing toward outside material	FKM (Fluor rubber)
Seat seal material category	Elastomer
Seat seal material	FKM (Fluor rubber)
Main valve wetted material	Stainless steel
Core guide	Sliding ring
Core guide 2	Sliding ring
Vacuum version	No
Analysis version	No
Oxygen version	No
Steam version	No
Media separation	No
Flow	Above seat
Port connection 1 type	Inner thread
Port connection 1 thread type	G
Port connection 1 thread marking	1/2
Port connection 2 type	Inner thread
Port connection 2 thread type	G
Port connection 2 thread marking	1/2
Voltage / rated voltage	24	V
Voltage / rated voltage	24	V
AC voltage	No
DC voltage	Yes
Voltage tolerance positive	10	%
Voltage tolerance negative	10	%
Coil type	placed on top
Coil insulation material (encasement)	PA (Polyamide)
Coil size	40	mm
Protection type (IP max. with suitable connector)	IP65
Thermal insulation class of the actuator	H
Rated power consumption	10	W
Electrical connection sort	Plug pattern form A according to DIN EN 175301-803
Electrical connection number of contacts	2 + Grounding conductor
Electrical connection type	male
Cable plug in delivery	not included
Electrical connection position	in direction of flow left
Kv value (water)	2,7	m3/h
QNn value (gas)	2.695	l/min
PWM frequency min.	180	Hz
PWM frequency max.	280	Hz
Operating range	1:10
Nominal operation/Duty cycle	100	%
Nominal pressure min	0,5	bar
Nominal pressure max	10	bar
Differential pressure max	10	bar
Temperature medium min	-10	°C
Temperature medium max	90	°C
Temperature environment min	-10	°C
Temperature environment max	55	°C
Mounting position	any
Pilot control orifice (mm)	1,2	mm
Pilot control seal material	FKM (Fluor rubber)
Medium-contacting part core material	Stainless steel
Medium-contacting part stopper material	Stainless steel
Medium-contacting part core guide tube material	Stainless steel
Medium-contacting part core guide element 1 material	PTFE (Polytetrafluorethylene)
Medium-contacting part core guide element 2 material	PTFE (Polytetrafluorethylene)
Medium-contacting part spacer sleeve material	Stainless steel
Parts free of oil and grease	Yes (according to DIS 1000020797)
Parts free of silicone	Yes (according to DIS 1000020797)
Weight	0,64	kg

Show full table Collapse table

Can be combined with

Type 2518

Cable Plug DIN EN 175301-803 - Form A

Type 8605

PWM Control Electronics for Solenoid Control...

Show full table Collapse table

Applications & Tools

Downloads

Data Sheets

	Description	Filesize	Language / Country
	Type 6223 data sheet \| proportional valve with control electronics	388 kB	EN / EU
	Typ 6223 Datenblatt \| Proportionalventil mit Ansteuerelektronik	798 kB	DE / DE

User Manuals

Description	Filesize	Language / Country
Additional manual Type 6013 \| PX011 - PX13 Use in the explosion-hazard area	518 kB	EN,FR,DE / EU
Additional manual Type XXXX \|PX04 Use in the explosion-hazard area	139 kB	EN,FR,DE / EU
Operating Instructions Type 6223 \| Proportional valve with control electronics	247 kB	EN,FR,DE,ES / EU
Operating Instructions Type AC10 \| ATEX approval	1 MB	EN,FR,DE / EU
Operating Instructions Type AC10 \| Solenoid coil \| ATEX and IECEx approval \| v1.0	2 MB	EN / EU
Operating Instructions Type AC10 \| Solenoid coil \| ATEX and IECEx approval \| v2.0	1 MB	EN / EU
Operating Instructions Type AC10 \| Solenoid coil \| HazLoc	2 MB	EN / EU
Supplement Type 8605 2836 2861 2863 2865 2871 2873 2875 6024 6223 \| PWM frequencies	79 kB	EN,FR,DE / EU
Bedienungsaneitung Typ AC10 \| Magnetspule \| ATEX und IECEx Zulassung \| v1.0	2 MB	DE / DE
Bedienungsanleitung Typ AC10 \| Magnetspule \| ATEX und IECEx Zulassung \| v2.0	1 MB	DE / DE
Instrukcja obsługi PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X \| Cewka elektromagnesu, Typ AC10	2 MB	PL / PL
Istruzioni d'uso Tipo AC10 \| Bobina magnetica, ATEX	1 MB	IT / IT
Manual d'utilisation Type AC10 \| Bobine magnétique \| Homologation ATEX et IECEx \| v1.0	2 MB	FR / FR
Manual d'utilisation Type AC10 \| Bobine magnétique \| Homologation ATEX et IECEx \| v2.0	1 MB	FR / FR
Manual de operação Bobina magnética tipo AC10 \| Dispositivo com homologação II 2G/D Ex	1 MB	PT / BR
Manual de operação Bobina magnética tipo AC10 \| PTB 14 ATEX2023 X, EPS 16 ATEX 1046 X	1 MB	PT / BR
Manuel d'utilisation Type AC10 \| Bobine magnétique \| HazLoc	2 MB	FR / FR

EU Declaration of Conformity

	Description	Filesize	Language / Country
	EU-DoC\|EU Declaration	2 MB	EN,FR,DE